, fuzzy and extremely harsh. The AxeTrak® alleviates this problem by allowing the user to connect directly from the speaker jack of their guitar amp to the input jack of the AxeTrak®. The output of the AxeTrak® is then plugged into a recording console, mixing board or computer soundcard using a standard low impedance microphone cable. This method of recording allows you to get a direct signal that includes the preamp tubes as well as the power tubes if using a tube amp. This is very important if you are a tone freak like most guitarists. The AxeTrak® is hand made and assembled right here in the USA. Built the old fashion way, with pride and attention to detail, one unit at a time.

What is the AxeTrak® ?

The AxeTrak® is a valuable production tool that allows the engineer, producer, or player a means to quietly capture the unique characteristics of their individual guitar sound. This compact electronic enclosure is capable of producing natural sounding rhythms and screaming lead guitar tones when plugged into a mixing board, soundcard, or recording console. Don't let the compact size fool you! The AxeTrak® is fuse-protected and will handle approximately 75 watts RMS of power. The AxeTrak® works perfectly with any 15 - 100 watt RMS guitar amplifier that can drive an 8 ohm load. However, it is not designed to handle high-power guitar amplifiers cranked at full volume like a power attenuator. Instructions for high-power use are clearly explained in the user manual and on our FAQ's page. The enclosure is made out of high quality, hardwood plywood for a warm tight sound, and is covered with heavy-duty, charcoal gray speaker carpet for non-suffocating sound dampening and long lasting durability. The heavy-duty 6" driver used in the AxeTrak® is custom made for our unique application. The sound is converted into an electrical signal with the use of a dynamic microphone cartridge, which has been carefully selected and modified exclusively for this device. This cartridge is securely mounted and its postition can be easily adjusted by turning a simple thumbscrew mounted on the top of the unit. When the screw is turned counterclockwise the microphone will be placed in the same position as the previous fixed microphone model. When the screw is turned clockwise the mic will be closer to the speaker and direct on axis. This feature gives the user incredible flexibility as to how they wish to record their guitar tracks. 

Now you truly can record the sound of your guitar rig 24/7 without disturbing your neighbors. No professional or home studio should ever be without this device.

Comme la plupart des guitaristes et musiciens le savent déjà, il est pratiquement impossible d'enregistrer des guitares en utilisant les sorties "recording output" ou "line out" de vos amplis ou préamplis préférés et ce de manière naturelle cela sonne toujours de manière agressive et synthétique. Ce son tant recherché ne peut-être obtenu qu'en utilisant un ampli, un baffle et un micro devant ce baffle, malheureusement, la plupart des guitaristes n'ont pas de studio pro avec isolation qui permet d'enregistrer des pistes de guitares à fort volume à minuit, car pour la plupart de nos amplis préférés, c'est quand ils vont fort qu'ils sonnent le mieux !
l' AxeTrak® avec son petit format, remplace votre baffle et votrre micro, branchez-le à votre ampli et à votre console ou votre carte son, il vous permettra d'avoir le grain de votre ampli comme si vous utilisiez votre baffle habituel. Son niveau d'isolation est tel que vous pourrez enregistrer vos pistes de guitares avec votre ampli à lampes poussé à fort volume pratiquement sans bruit !

Qu'est-ce que l' AxeTrak®

L'AxeTrak® est un caisson isolé fait en multi-plis de bois dur, il est petit et léger. Il comporte un Hp de 6" spécialement conçu pour lui. Il peut "encaisser" 75 Watts rms, c'est à dire n'importe quel ampli de 15W à100W. Il renferme un micro dont la position peut s'ajuster grâce à une molette. Il dispose aussi d'un switch qui permet d'atténuer les aigus et aussi un bouchon amovible pour un rendu avec plus de basses. L' AxeTrak® comporte un fusible pour protection en cas de surmodulation. L'AxeTrak® est fabriqué entièrement aux US. Maintenant vous pourrez jouez et enregistrer votre guitare 24H sur 24 sans déranger vos voisins !